|
MOXY Internet - Product Range - MT36
Product Range - MT36
|
BODY
- Material: Hardened abrasion-resistant steel plates
- Tilt cylinders: Single stage, double-acting
- Tipping time: Up: 12 sec / down: 11 sec
- The body is designed for exhaust heating
- Sloping body down from the hinge point
DRIVE LINE
- Full-time 6 x 6 drive with two traverse differentials and one longitudinal
- Front axle traverse differential: Limited-slip with 45% locking ratio
- Rear axle traverse differential: Limited-slip with 45% locking ratio
- Inter-axle longitudinal differential: Torque-proportioning differential, integrated into the transmission Torque distribution:
- 1/3 to the front axle
- 2/3 to the rear axle
- 100% lockable
- Tandem housing: Gear-driven, freeswinging. Provides equal drive to all rear wheels and ensures the best possible ground contact - whatever ground conditions
HYDRAULIC SYSTEM
- Pumps: 2 variable deplacement piston pumps
- Delivery: 320 l/min @ 2200 rpm
- Cooling fan/brakes etc.: 60 l/min @ 2200 rpm
- Filtration: One return flow filter and high-pressure filter
- Pressure-setting, main safety valves:
- Tipping circuit: 280 bar
- Steering circuit: 210 bar
ELECTRICAL SYSTEM
- Alternator: 28V 100A
- Batteries (two): 12V 140Ah
(series connected to give 24V)
- Starter: 6,7 kW
CAB
- Approved to ROPS/FOPS standards (ISO 3471, ISO 3449, SAE J231 and SAE J1040 April ‘88)
- Low interior sound level 74 dB(A) (ISO 6394)
- Low exterior sound power level 109 dB(A) (ISO 6395)
- The cab is centrally located on rubber mountings
Hand and arm vibrations are less than 2,5 m/s2 according to ISO 5349-2
Whole body vibration is less than 0,5m/s2 according to ISO 2631-1
- Superior visibility - for safer operation
- Superior operating controls location
- Adjustable suspended operator seat
- Adjustable steering column
- Heater and air conditioning
BRAKE SYSTEM
- Dual circuit braking system acting on all six wheels
- Approved according to ISO 3450
- All hydraulic operated disc brakes all round
- Spring actuated hydraulic released parking brake, mounted on the propeller shaft
- Max. gradient, parking brake: 20°
- Automatic exhaust brake as standard
- Automatic hydraulic retarder brake as standard
SUSPENSION
- Front: Independent with long life rubber springs and hydraulic shock absorbers
- Rear: Free-swinging tandem housing
TYRES
- Standard 26.5 R25 two star radial.
- Optional 800/65 R29
|
| WEIGHTS |
| Empty: | Front axle | 13 400 kg |
| | Rear axle | 13 300 kg |
| Loaded: | Front axle | 19 500 kg |
| | Rear axle | 39 900 kg |
| Pay load: | | 32 700 kg |
| Total weight (loaded): | 59 400 kg |
| |
| TRANSMISSION |
|
ZF 6 WG 310 Dash 4 electronically-controlled automatic transmission, the torque converter has automatic lock-up in all gears.
|
| |
| Km/h | Forward | Reverse |
| 1st gear | 6 | 6 |
| 2nd gear | 9 | 14 |
| 3rd gear | 14 | 31 |
| 4th gear | 22 | |
| 5th gear | 32 | |
| 6th gear | 51 | |
| |
| CAPACITIES | Litre |
| Fuel tank | 425 |
| Hydraulic system | 250 |
| Engine cooling system | 50 |
| Transmission | 55 |
| Engine crankcase | 34 |
| Front differential | 13.2 |
| Front reduction gear | 2 x 7.5 |
| Rear differential | 46 |
| Tandem housing | 2 x 150 |
|
| BODY CAPACITIES |
| Level capacity | 15,6m3 (16,1 m3) |
| Heaped capacity | 20,1m3 (21,0 m3) |
Acc. SAE J 1363, 2:1
(with top tailgate in brackets)
|
| |
| SCANIA DC 12 ENGINE |
Scania DC 12, water-cooled, unit injected diesel engine with turbo charger and air to air intercooler.
- Complies with Stage 3 of EU Directive 97/68/-EC and Tier 3 of USA/California regulations (ISO 8178) for emissions.
- Power rating: (1kW = hp/1,36)
(ISO 3046) 294 kW (400 hp)
(ISO 9249) 285 kW (388 hp)
- No. of cylinders: 6 (in line)
- Cylinder volume: 11,7 litres
- Air filter: Dry type
|
| |
| GROUND PRESSURE |
By sinking 15% of free tyre radius and specified weights
Standard 26,5 R25 tyres
- Empty: Front:108 kPa, Rear:62 kPa
- Loaded: Front:160 kPa, Rear:170 kPa.
By sinking 7% of free tyre radius and specified weights
Optional 800/65 R29 tyres
- Empty: Front:95 kPa, Rear:56 kPa
- Loaded: Front:138 kPa, Rear:146 kPa.
(1 kPa = 0,0102 kg/cm2)
|
| |
| ARTICULATION HINGE AND STEERING |
- Articulation hinge with forwardmounted turning ring
- Steering cylinders (two): Doubleacting
- The steering is approved according to ISO 5010
- Max. steering angle: 45°
- Ground driven emergency steering pump
Turning radius according to ISO 7457: 8,37 m
|
|
 |
|
